You can give your bathroom a unique character by using stone. A great choice for bathroom countertops is natural stone, especially when used in combination with complementary colors. There are some things you should keep in mind when installing natural stone in your bathroom. Make sure the stone is resistant to water. Granite is a cheaper option than marble. However, you need to make sure you are choosing a high-quality slab.
It is a good idea for you to consult a designer if you have any questions about cleaning your stone bathroom. Engineered stone is usually uniform in color and pattern. Natural stone can be found in many colors and styles, so you might end up with something different than what you planned. However, you should discuss the care and maintenance of your stone with your contractor. It may not be the best option for you if you are planning to use it daily.
You need to be careful when cleaning natural stone. Do not clean natural stone with harsh chemicals, or use soapy products. Instead, use a neutral-pH cleaner to remove water deposits and prevent grime and mildew from forming. Avoid over-spray, as it can dull the stone's appearance. You should use soaps with a neutral pH balance.
Stone flooring is durable and can be an affordable option if you have a tight budget. If you prefer a dark décor theme, slate is a great alternative. When choosing natural finishes and textures, make sure you do not forget about them. You can opt for bush-hammered, tumbled, or chiseled finishes to create a non-slip surface in your bathroom. Tiles with grey and white colors can be an excellent choice, or you can be adventurous and use off-white tiles.
Before sealing stone in your bathrooms, be sure to test for absorbency. To do this, run a water-test on it. After a few minutes, observe the color. If it's darker than what is in the sample, this indicates that water has penetrated to the surface and will need sealing. Online retailers can sell specific stone cleaning products. A mild cleanser is best for natural stones.
Marble is another excellent option for natural stone bathroom countertops. Granite and Marble are the two most common natural stones used in bathrooms. Natural stones are durable and beautiful and can be used to enhance your space. And they can be inexpensive, too. This material also offers excellent protection and resale value. Marble and other natural stones can be used as wall and floor coverings. For a truly unique bathroom design, you can mix and match different textures.
FAQ
Do you prefer to hire a general contractor, or a subcontractor for your project?
A general contractor will usually cost more than a subcontractor. A general contractor has many employees, so they often charge their clients a lot of money for labor costs. A subcontractor hires only one employee so they charge less per an hour.
Can I rent a dumpster?
To help you get rid of the debris from your home remodeling project, you can hire a dumpster. Renting a dumpster to dispose of your trash is a great option.
How do I renovate my house with zero money?
These are the steps to follow when renovating your house without spending a lot of money.
-
Plan your budget
-
Find out the materials you require
-
Decide where to put them
-
Make a list with the items you need to purchase
-
How much money do you have?
-
Plan your renovation project
-
Get started on your plans
-
Do some online research
-
Ask family and friends for their help
-
Get creative
Statistics
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
External Links
How To
How can I plan a complete house remodel?
Research and careful planning are essential when planning a house remodel. There are many things you should consider before starting your project. It is important to determine what type of home improvements you are looking to make. You could choose from different categories such as kitchen, bathroom, bedroom, living room, etc. Once you've decided on which category to work on you will need to calculate how much money is available for your project. If you don't have experience with working on houses, it's best to budget at minimum $5,000 per room. If you have more experience, you might be able spend less.
After you have determined how much money you have available, you can decide how big of a project you would like to undertake. If your budget only allows for a small renovation of your kitchen, you will be unable to paint the walls, replace the flooring or install countertops. On the other hand, if you have enough money for a full kitchen renovation, you can probably handle just about anything.
Next, find a contractor who is skilled in the type and scope of work you wish to undertake. This will ensure you get quality results and save you a lot of hassle later. You should begin gathering materials and supplies after you've found a competent contractor. You might need to make everything from scratch depending upon the size of your project. There are many stores that offer pre-made products so it shouldn't be difficult to find what you need.
Once you've gathered the supplies needed, it's now time to start planning. Begin by sketching out a rough plan of where furniture and appliances will be placed. Next, plan the layout. Be sure to leave enough room for electric outlets and plumbing. Make sure to position the most visited areas close to the front door. Visitors can also easily access them. Finally, you'll finish your design by deciding on colors and finishes. You can save money by using neutral colors and simple designs.
Now it's time to build! Before you begin any construction, make sure to verify your local codes. While permits are required in some cities, homeowners can build without one in others. Before you can begin construction, remove any walls and floors. You will then lay plywood sheets to protect your new flooring. Next, you will nail or screw together pieces wood to create the frame for your cabinets. The frame will be completed when doors and windows are attached.
After you're done, there are still a few things you need to do. Covering exposed pipes and wires is one example. This can be done with plastic sheeting and tape. Also, you will need to hang mirrors or pictures. Make sure to keep your work area neat and tidy.
These steps will help you create a functional, beautiful home that is both functional and attractive. Now that you have a basic understanding of how to plan a house remodel, it's time to get started.